RS PRO 50 W Electronic LED Lighting Ballast, 220 → 240 V

RS Stock No.: 796-1905Brand: RS PRO
brand-logo
View all in Lighting Ballasts

Technical Document

Specifications

Brand

RS Pro

Wattage

50 W

Number of Lamps

1

Ballast Type

Electronic

Supported Lamp Type

LED

Voltage Rating

220 → 240 V

Dimmable

Yes

Length

124 mm

Width

79 mm

Height

22mm

Minimum Operating Temperature

-25°C

Maximum Operating Temperature

+50°C

Dimming Protocol

DALI

Country of Origin

Italy

Product details

RS Dimmable Multipower LED Drivers

Direct current, dimmable, electronic drivers multi-voltage and multi-current, for powering LEDs and LED modules. This multi-power LED driver is supplied with dip-switch, for the selection of the output current. This range of dimmable electronic drivers can power both voltage LED strips and power current LEDs. This power supply delivers high power, with active PFC and flexible selection of the output current.

Multi-power driver supplied with dip-switch for the selection of the output current
Active Power Factor Corrector
Protections against overheating, short circuits, mains voltage spikes and overloads
Can be switched on and off on secondary circuit for power LED

Approvals

EN 50172 (VDE 0108)
EN 61000-3-2
EN 61000-3-3
EN 61347-1
EN 61347-2-13
EN 61547
EN 62384

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

P.O.A.

RS PRO 50 W Electronic LED Lighting Ballast, 220 → 240 V

P.O.A.

RS PRO 50 W Electronic LED Lighting Ballast, 220 → 240 V
Stock information temporarily unavailable.

Technical Document

Specifications

Brand

RS Pro

Wattage

50 W

Number of Lamps

1

Ballast Type

Electronic

Supported Lamp Type

LED

Voltage Rating

220 → 240 V

Dimmable

Yes

Length

124 mm

Width

79 mm

Height

22mm

Minimum Operating Temperature

-25°C

Maximum Operating Temperature

+50°C

Dimming Protocol

DALI

Country of Origin

Italy

Product details

RS Dimmable Multipower LED Drivers

Direct current, dimmable, electronic drivers multi-voltage and multi-current, for powering LEDs and LED modules. This multi-power LED driver is supplied with dip-switch, for the selection of the output current. This range of dimmable electronic drivers can power both voltage LED strips and power current LEDs. This power supply delivers high power, with active PFC and flexible selection of the output current.

Multi-power driver supplied with dip-switch for the selection of the output current
Active Power Factor Corrector
Protections against overheating, short circuits, mains voltage spikes and overloads
Can be switched on and off on secondary circuit for power LED

Approvals

EN 50172 (VDE 0108)
EN 61000-3-2
EN 61000-3-3
EN 61347-1
EN 61347-2-13
EN 61547
EN 62384