RS PRO 32 W Electronic LED Lighting Ballast, 220 → 240 V
Technical Document
Specifications
Brand
RS ProWattage
32 W
Ballast Type
Electronic
Supported Lamp Type
LED
Voltage Rating
220 → 240 V
Dimmable
Yes
Length
103 mm
Width
67 mm
Height
21mm
Minimum Operating Temperature
-25°C
Maximum Operating Temperature
+50°C
PRICED TO CLEAR
Yes
Dimming Protocol
DALI
Country of Origin
Italy
Product details
RS Dimmable Multipower LED Drivers
Direct current, dimmable, electronic drivers multi-voltage and multi-current, for powering LEDs and LED modules. This multi-power LED driver is supplied with dip-switch, for the selection of the output current. This range of dimmable electronic drivers can power both voltage LED strips and power current LEDs. This power supply delivers high power, with active PFC and flexible selection of the output current.
Multi-power driver supplied with dip-switch for the selection of the output current
Active Power Factor Corrector
Protections against overheating, short circuits, mains voltage spikes and overloads
Can be switched on and off on secondary circuit for power LED
Approvals
EN 50172 (VDE 0108)
EN 61000-3-2
EN 61000-3-3
EN 61347-1
EN 61347-2-13
EN 61547
EN 62384
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical Document
Specifications
Brand
RS ProWattage
32 W
Ballast Type
Electronic
Supported Lamp Type
LED
Voltage Rating
220 → 240 V
Dimmable
Yes
Length
103 mm
Width
67 mm
Height
21mm
Minimum Operating Temperature
-25°C
Maximum Operating Temperature
+50°C
PRICED TO CLEAR
Yes
Dimming Protocol
DALI
Country of Origin
Italy
Product details
RS Dimmable Multipower LED Drivers
Direct current, dimmable, electronic drivers multi-voltage and multi-current, for powering LEDs and LED modules. This multi-power LED driver is supplied with dip-switch, for the selection of the output current. This range of dimmable electronic drivers can power both voltage LED strips and power current LEDs. This power supply delivers high power, with active PFC and flexible selection of the output current.
Multi-power driver supplied with dip-switch for the selection of the output current
Active Power Factor Corrector
Protections against overheating, short circuits, mains voltage spikes and overloads
Can be switched on and off on secondary circuit for power LED
Approvals
EN 50172 (VDE 0108)
EN 61000-3-2
EN 61000-3-3
EN 61347-1
EN 61347-2-13
EN 61547
EN 62384