Analog Devices AD9887AKSZ-140 MQFP Display Driver, 160 Pin, Maximum of 120 V

RS Stock No.: 820-9410PBrand: Analog DevicesManufacturers Part No.: AD9887AKSZ-140
brand-logo
View all in Display Drivers

Technical Document

Product details

RS Multipower LED Drivers MP 50 K3 series

The MP 50 K3 is a direct current electronic driver, multi-voltage and multi-current, for powering LEDs and LED modules. This multi-power LED driver is supplied with dip-switch, for the selection of the output current. The MP 50 K3 is a high performance, low cost driver, designed for LED lighting solutions not requiring dimming. This power supply delivers high power, with active PFC, flexible selection of the output current and lower costs compared to a dimmable solution.

Multi-power driver with dip-switch
IP20 rated, indoor use
Class II protection against electric shock
Active power factor corrector
Protected against overheating, short circuits, mains voltage spikes and overloads

Approvals

EN 50172 (VDE 0108)
EN 55015
EN 61000-3-2
EN 61000-3-3
EN 61347-1
EN 61347-2-13
EN 61547
EN 62384

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

P.O.A.

Analog Devices AD9887AKSZ-140 MQFP Display Driver, 160 Pin, Maximum of 120 V
Select packaging type

Production pack (Tray)

Select packaging type

Standard - each

Available in multiples of 1.

Production -

Available in multiples of 1.

Recommended for ordering in large quantities. Items are packaged ready for insertion into machinery, allowing you to improve production efficiency.

1

Available in multiples of 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

P.O.A.

Analog Devices AD9887AKSZ-140 MQFP Display Driver, 160 Pin, Maximum of 120 V
Stock information temporarily unavailable.
Select packaging type

Production pack (Tray)

Select packaging type

Standard - each

Available in multiples of 1.

Production -

Available in multiples of 1.

Recommended for ordering in large quantities. Items are packaged ready for insertion into machinery, allowing you to improve production efficiency.

1

Available in multiples of 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

Technical Document

Product details

RS Multipower LED Drivers MP 50 K3 series

The MP 50 K3 is a direct current electronic driver, multi-voltage and multi-current, for powering LEDs and LED modules. This multi-power LED driver is supplied with dip-switch, for the selection of the output current. The MP 50 K3 is a high performance, low cost driver, designed for LED lighting solutions not requiring dimming. This power supply delivers high power, with active PFC, flexible selection of the output current and lower costs compared to a dimmable solution.

Multi-power driver with dip-switch
IP20 rated, indoor use
Class II protection against electric shock
Active power factor corrector
Protected against overheating, short circuits, mains voltage spikes and overloads

Approvals

EN 50172 (VDE 0108)
EN 55015
EN 61000-3-2
EN 61000-3-3
EN 61347-1
EN 61347-2-13
EN 61547
EN 62384