BEL POWER SOLUTIONS INC Switching Power Supply, CPA250-4530G, 3.3 V dc, 5 V dc, ±12 V dc, 2A, 250W, Quad Output, 90
Technical Document
Specifications
Output Voltage
3.3 V dc, 5 V dc, ±12 V dc
Output Current
2 A, 5.5 A, 40A
Power Rating
250W
Number of Outputs
4
Input Voltage
90 → 264V ac
Mounting Type
Rack Mount
Length
162.5mm
Width
128.7mm
Depth
40.6mm
Minimum Temperature
-25°C
Weight
800g
Maximum Temperature
+50°C
Country of Origin
China
Product details
250W & 500W CompactPCI®, CPA Series
Fully compliant to the PICMG® 2.11 power interface specification using a standard Positronic 47-Pin connector
At 50°C delivers 40A on both the +5 and +3.3 volt outputs
Remote sense and active current share on the +5, +3.3 and +12 volt outputs, along with internal ORing FETs, allow these units to be used in redundant, hot-swap applications
High current density & output power in industry standard package (3U x 8HP)
Single wire active current share and remote sense on +5, +3.3, and +12V outputs
Over temperature, over current and over voltage protection
Input good and power supply fault LED indicators
Inhibit and enable inputs
Meets international safety standards and displays the CE Mark for Low Voltage Directive
Standards
UL1950, CSA22.2 No 950-95, EN60950 (TUV)
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical Document
Specifications
Output Voltage
3.3 V dc, 5 V dc, ±12 V dc
Output Current
2 A, 5.5 A, 40A
Power Rating
250W
Number of Outputs
4
Input Voltage
90 → 264V ac
Mounting Type
Rack Mount
Length
162.5mm
Width
128.7mm
Depth
40.6mm
Minimum Temperature
-25°C
Weight
800g
Maximum Temperature
+50°C
Country of Origin
China
Product details
250W & 500W CompactPCI®, CPA Series
Fully compliant to the PICMG® 2.11 power interface specification using a standard Positronic 47-Pin connector
At 50°C delivers 40A on both the +5 and +3.3 volt outputs
Remote sense and active current share on the +5, +3.3 and +12 volt outputs, along with internal ORing FETs, allow these units to be used in redundant, hot-swap applications
High current density & output power in industry standard package (3U x 8HP)
Single wire active current share and remote sense on +5, +3.3, and +12V outputs
Over temperature, over current and over voltage protection
Input good and power supply fault LED indicators
Inhibit and enable inputs
Meets international safety standards and displays the CE Mark for Low Voltage Directive
Standards
UL1950, CSA22.2 No 950-95, EN60950 (TUV)