Technical Document
Specifications
Number of Pots per Package
1
Taper Type
Linear
Memory Type
Non-Volatile
Resistance Value
10kΩ
Number of Positions
100
Control Interface
Serial-3 Wire
Power Supply Type
Single
Maximum Operating Temperature
+70 °C
Pin Count
8
Minimum Operating Temperature
0 °C
Mounting Type
Surface Mount
Height
1.5mm
Width
4mm
Length
5mm
Typical Single Supply Voltage
5 V
Package Type
SOIC
Brand
Renesas ElectronicsDimensions
5 x 4 x 1.5mm
Product details
PEL103 Power Energy Logger (Unit Only)
The PEL103 Power Energy Logger is designed to measure and record the consumption of electrical installations in order to improve energy efficiency and reduce costs.
4 Voltage channels + 3 Current channels
Triple digital display
Suitable for use on single-phase, split-phase and three-phase installations
Can be installed without cutting off the mains power supply
Map the electrical consumption on a site
Gain a real-time snapshot of consumption
Analyse electrical network quality
Record harmonics up to the 50th order with phase indication
Record results to an SD card
Real-time communication with a PC
Data transfer and analysis with supplied PEL software
The PEL103 Logger is sold without sensors. Find the MN93A clamp 236-559 and the AmpFLEX™ A193-450 mm clamp 236-565 current sensors here, available separately.
Supplied with
4 measurement leads (straight banana, 3 m long, black)
4 crocodile clips (black)
1 SD card (2 GB)
1 set of rings and inserts (for ends of leads and current sensors)
1 mains cable
1 USB cable (Type A, Type B)
1 Multifix mounting systems
1 operating manual (on CD)
1 bag
1 safety datasheet
PEL Transfer PC software
1 quick start-up guide
SD Card to USB adapter
Standards
IEC 61010 600 V CAT IV – 1,000 V CAT III
Stock information temporarily unavailable.
Please check again later.
P.O.A.
Standard
2
P.O.A.
Standard
2
Technical Document
Specifications
Number of Pots per Package
1
Taper Type
Linear
Memory Type
Non-Volatile
Resistance Value
10kΩ
Number of Positions
100
Control Interface
Serial-3 Wire
Power Supply Type
Single
Maximum Operating Temperature
+70 °C
Pin Count
8
Minimum Operating Temperature
0 °C
Mounting Type
Surface Mount
Height
1.5mm
Width
4mm
Length
5mm
Typical Single Supply Voltage
5 V
Package Type
SOIC
Brand
Renesas ElectronicsDimensions
5 x 4 x 1.5mm
Product details
PEL103 Power Energy Logger (Unit Only)
The PEL103 Power Energy Logger is designed to measure and record the consumption of electrical installations in order to improve energy efficiency and reduce costs.
4 Voltage channels + 3 Current channels
Triple digital display
Suitable for use on single-phase, split-phase and three-phase installations
Can be installed without cutting off the mains power supply
Map the electrical consumption on a site
Gain a real-time snapshot of consumption
Analyse electrical network quality
Record harmonics up to the 50th order with phase indication
Record results to an SD card
Real-time communication with a PC
Data transfer and analysis with supplied PEL software
The PEL103 Logger is sold without sensors. Find the MN93A clamp 236-559 and the AmpFLEX™ A193-450 mm clamp 236-565 current sensors here, available separately.
Supplied with
4 measurement leads (straight banana, 3 m long, black)
4 crocodile clips (black)
1 SD card (2 GB)
1 set of rings and inserts (for ends of leads and current sensors)
1 mains cable
1 USB cable (Type A, Type B)
1 Multifix mounting systems
1 operating manual (on CD)
1 bag
1 safety datasheet
PEL Transfer PC software
1 quick start-up guide
SD Card to USB adapter
Standards
IEC 61010 600 V CAT IV – 1,000 V CAT III