RS PRO Barrier Strip, 1 Contact, 20A, 450 V
Technical Document
Specifications
Brand
RS ProNumber Of Contacts
1
Contact Material
Steel
Contact Plating
Zinc
Screw size
M4
Wire Size
22 → 12 AWG
Material
Polyamide
Fixing Centre
11.2mm
Current Rating
20A
Voltage Rating
450 V
Dimensions
38 x 29 x 11mm
Depth
11mm
Length
38mm
Width
29mm
Minimum Operating Temperature
-5°C
Maximum Operating Temperature
+110°C
Country of Origin
Italy
Product details
Single Pole Interlocking Barrier Strip
Zinc-plated and passivated steel inserts All contacts on any one pole are commoned. Nylon body material
Mounts direct to flat surface (including metal base) or to miniature DIN rail (stock no. 467-349)
The tab/tab type has three 6.3 mm ( in.) tabs on each side. Suitable crimp connectors are available (see stock no. 534-705). The tab/screw type has three 6.3 mm tabs on one side and an M4 screw terminal on the other
An end plate must be used to complete any combination of terminals. This plate has the final 3.5 mm fixing hole
Fixing centres: 11.2 mm terminal to terminal, 11.0 mm terminal to end plate
Stock information temporarily unavailable.
Please check again later.
P.O.A.
10
P.O.A.
10
Technical Document
Specifications
Brand
RS ProNumber Of Contacts
1
Contact Material
Steel
Contact Plating
Zinc
Screw size
M4
Wire Size
22 → 12 AWG
Material
Polyamide
Fixing Centre
11.2mm
Current Rating
20A
Voltage Rating
450 V
Dimensions
38 x 29 x 11mm
Depth
11mm
Length
38mm
Width
29mm
Minimum Operating Temperature
-5°C
Maximum Operating Temperature
+110°C
Country of Origin
Italy
Product details
Single Pole Interlocking Barrier Strip
Zinc-plated and passivated steel inserts All contacts on any one pole are commoned. Nylon body material
Mounts direct to flat surface (including metal base) or to miniature DIN rail (stock no. 467-349)
The tab/tab type has three 6.3 mm ( in.) tabs on each side. Suitable crimp connectors are available (see stock no. 534-705). The tab/screw type has three 6.3 mm tabs on one side and an M4 screw terminal on the other
An end plate must be used to complete any combination of terminals. This plate has the final 3.5 mm fixing hole
Fixing centres: 11.2 mm terminal to terminal, 11.0 mm terminal to end plate