Siemens Phase Monitoring Relay, 3 Phase, SPDT, 160 → 690V ac, DIN Rail
Technical Document
Specifications
Brand
SiemensMonitoring Application
Phase
Electrical Phase
3
Contact Configuration
SPDT
Voltage Sensing Range
160 → 690V ac
Mounting Type
DIN Rail
Phase Sensitivity
Phase Failure, Phase Sequence
Series
3UG4
Height
83mm
Length
91mm
Minimum Voltage Sensed
160V ac
Operating Temperature Range
+60°C
Terminal Type
Screw
Number of Poles
3
Minimum Operating Temperature
-25°C
Width
22.5mm
Maximum Operating Temperature
+60°C
Dimensions
91 x 22.5 x 83mm
Maximum Voltage Sensed
690V ac
Country of Origin
Germany
Product details
Line Supply and Three Phase Voltage
3UG4 relays that monitor current, power factor and active current are ideal for monitoring the load of motors and functionality of electronic loads. These devices detect the effect of wear and faults early on. This means that appropriate actions can be taken before more significant damage occurs.
Wide voltage range versions reduce inventory stock levels
Variable settings for over-range, under-voltage or window monitoring
Delay times and reset switch
Actual value and fault types are permanently displayed
Removable terminals
22.5mm wide
3UG4614 to 3UG4617 can be digitally set, with fault memory and LDC display
1-20V hysterisis
Phase failure (except stock no 518-7275)
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical Document
Specifications
Brand
SiemensMonitoring Application
Phase
Electrical Phase
3
Contact Configuration
SPDT
Voltage Sensing Range
160 → 690V ac
Mounting Type
DIN Rail
Phase Sensitivity
Phase Failure, Phase Sequence
Series
3UG4
Height
83mm
Length
91mm
Minimum Voltage Sensed
160V ac
Operating Temperature Range
+60°C
Terminal Type
Screw
Number of Poles
3
Minimum Operating Temperature
-25°C
Width
22.5mm
Maximum Operating Temperature
+60°C
Dimensions
91 x 22.5 x 83mm
Maximum Voltage Sensed
690V ac
Country of Origin
Germany
Product details
Line Supply and Three Phase Voltage
3UG4 relays that monitor current, power factor and active current are ideal for monitoring the load of motors and functionality of electronic loads. These devices detect the effect of wear and faults early on. This means that appropriate actions can be taken before more significant damage occurs.
Wide voltage range versions reduce inventory stock levels
Variable settings for over-range, under-voltage or window monitoring
Delay times and reset switch
Actual value and fault types are permanently displayed
Removable terminals
22.5mm wide
3UG4614 to 3UG4617 can be digitally set, with fault memory and LDC display
1-20V hysterisis
Phase failure (except stock no 518-7275)