Baumer GI355 Series Optical Incremental Encoder, 500 ppr, HTL/Push Pull Signal, Solid Type, 10mm Shaft
Technical Document
Specifications
Encoder Technology
Optical
Output Signal Type
HTL/Push Pull
Maximum Revolutions
10000rpm
Shaft Type
Solid
IP Rating
IP54
Pulses Per Revolution
500
Shaft Diameter
10mm
Mounting Type
Clamping Flange
Minimum Operating Temperature
-25°C
Maximum Operating Temperature
+85°C
Overall Width
58mm
Switching Frequency
≤150 kHz
Supply Voltage
4.75 → 30 V dc
Brand
BaumerConnection Type
Flange connector M23
Series
GI355
Country of Origin
Germany
Product details
EL Series EL155, EL183, EL301, EL302, EL303 and EL561 Single Output PSUs
Separate 3 digit 14mm voltage and current meters
Constant voltage or constant current operation
New safety terminals accept fixed shroud 4mm plugs plus forks and wires
DC output switch enables voltage/current setup with load disconnected
Low ripple and noise
Supplied with mains lead and instructions
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical Document
Specifications
Encoder Technology
Optical
Output Signal Type
HTL/Push Pull
Maximum Revolutions
10000rpm
Shaft Type
Solid
IP Rating
IP54
Pulses Per Revolution
500
Shaft Diameter
10mm
Mounting Type
Clamping Flange
Minimum Operating Temperature
-25°C
Maximum Operating Temperature
+85°C
Overall Width
58mm
Switching Frequency
≤150 kHz
Supply Voltage
4.75 → 30 V dc
Brand
BaumerConnection Type
Flange connector M23
Series
GI355
Country of Origin
Germany
Product details
EL Series EL155, EL183, EL301, EL302, EL303 and EL561 Single Output PSUs
Separate 3 digit 14mm voltage and current meters
Constant voltage or constant current operation
New safety terminals accept fixed shroud 4mm plugs plus forks and wires
DC output switch enables voltage/current setup with load disconnected
Low ripple and noise
Supplied with mains lead and instructions