Technical Document
Specifications
Brand
Phoenix ContactModule Type
Isolation Amplifier
Input Signal Type
Current, Voltage
Output Signal Type
Current
Input Range
0 → 10 V, 0 → 20mA
Output Range
0 → 20mA
Supply Voltage
24V dc
Hazardous Area Certification
ATEX
Mounting Type
DIN Rail Mount
Operating Temperature Range
-20 → +60°C
Series
3RS7003
Number of Channels
2
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+60°C
Country of Origin
Germany
Product details
4-way Isolated Signal Duplicator
Phoenix Contacts signal duplicator is a great conditioner for isolation and duplication of analog signals. The 2864176 is a mini 6.2mm width & is easily installed via a DIN rail mount with an option to connect to a TBUS DIN rail connector. This signal duplicator is backed by an Ex-zone 2 rating allowing it to be installed in potentially explosive areas.
2864176 also has a diagnostic LED located on the front. A red LED will flash if there is an error with the device.
Features and benefits:
- Configurable 4-way isolating amplifier
- Thin 6.2mm housing width
- Ex-zone 2 approval
- DIP switch allows configuration of up to 8 signal combinations
- Duplication of a standard analog signal on two current outputs
ATEX and zone 2:
The ATEX standard is the name given to European directives. 99/92/EC and 94/9/EC. Zone 2 is an area that is classified that an explosion could happen with air or flammable substances, however if it did occur it would only happen for a short time.
Accessories:
TBUS DIN rail connector – 489-2825
Power terminal block – 489-2926
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical Document
Specifications
Brand
Phoenix ContactModule Type
Isolation Amplifier
Input Signal Type
Current, Voltage
Output Signal Type
Current
Input Range
0 → 10 V, 0 → 20mA
Output Range
0 → 20mA
Supply Voltage
24V dc
Hazardous Area Certification
ATEX
Mounting Type
DIN Rail Mount
Operating Temperature Range
-20 → +60°C
Series
3RS7003
Number of Channels
2
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+60°C
Country of Origin
Germany
Product details
4-way Isolated Signal Duplicator
Phoenix Contacts signal duplicator is a great conditioner for isolation and duplication of analog signals. The 2864176 is a mini 6.2mm width & is easily installed via a DIN rail mount with an option to connect to a TBUS DIN rail connector. This signal duplicator is backed by an Ex-zone 2 rating allowing it to be installed in potentially explosive areas.
2864176 also has a diagnostic LED located on the front. A red LED will flash if there is an error with the device.
Features and benefits:
- Configurable 4-way isolating amplifier
- Thin 6.2mm housing width
- Ex-zone 2 approval
- DIP switch allows configuration of up to 8 signal combinations
- Duplication of a standard analog signal on two current outputs
ATEX and zone 2:
The ATEX standard is the name given to European directives. 99/92/EC and 94/9/EC. Zone 2 is an area that is classified that an explosion could happen with air or flammable substances, however if it did occur it would only happen for a short time.
Accessories:
TBUS DIN rail connector – 489-2825
Power terminal block – 489-2926