Technical Document
Specifications
Model Number (p)
Navitek II
Reinforced
No
Model Number (p)
1492302
Maximum Operating Temperature
+60°C
Colour
Clear
Type
Crimp Connector Dummy Cube
Minimum Operating Temperature
-15°C
Inner Diameter
12mm
Outer Diameter
15mm
Material
PVC
Length
25m
Bend Radius
135mm
Maximum Working Pressure
4 bar
Electrical Connection
3 Pin, Cable With Connector M8
Brand
RS ProCountry of Origin
United Kingdom
Product details
Proxistor High Power dc Sensor Test Unit
Designed to test 2, 3 and 4 wire dc proximity sensors, inductive, capacitive, photoelectronic, ultrasonic, laser, contrast, colour mark etc. Inbuilt power supply gives a continuous 24Vdc @ 100mA
Will set up and test sensors with high current requirements
Reduce downtime by diagnosing sensor faults
Avoid discarding operational sensors
Determine the spec of an unknown sensor with PNP, NPN, N/O & N/C operation indication via buzzer and LEDs
Easy sensor set-up/calibration without connection to the control circuit
Easy connection via spring loaded terminals
Low battery indicator
Requires 6 x 1.5V AA batteries (stock no. 591-225)
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical Document
Specifications
Model Number (p)
Navitek II
Reinforced
No
Model Number (p)
1492302
Maximum Operating Temperature
+60°C
Colour
Clear
Type
Crimp Connector Dummy Cube
Minimum Operating Temperature
-15°C
Inner Diameter
12mm
Outer Diameter
15mm
Material
PVC
Length
25m
Bend Radius
135mm
Maximum Working Pressure
4 bar
Electrical Connection
3 Pin, Cable With Connector M8
Brand
RS ProCountry of Origin
United Kingdom
Product details
Proxistor High Power dc Sensor Test Unit
Designed to test 2, 3 and 4 wire dc proximity sensors, inductive, capacitive, photoelectronic, ultrasonic, laser, contrast, colour mark etc. Inbuilt power supply gives a continuous 24Vdc @ 100mA
Will set up and test sensors with high current requirements
Reduce downtime by diagnosing sensor faults
Avoid discarding operational sensors
Determine the spec of an unknown sensor with PNP, NPN, N/O & N/C operation indication via buzzer and LEDs
Easy sensor set-up/calibration without connection to the control circuit
Easy connection via spring loaded terminals
Low battery indicator
Requires 6 x 1.5V AA batteries (stock no. 591-225)