35 ° Mercury Tilt Switch, 12.5 A, 240V
Technical Document
Specifications
Brand
AssemtechDifferential Angle
35°
Maximum Current
12.5A
Maximum AC Voltage
240V
Contact Resistance
5Ω
Terminal Type
Wire Lead
Length
226.5mm
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+105°C
Dimensions
226.5 x 30mm
Country of Origin
United Kingdom
Product details
Tip-Over Encapsulated
IP65 polypropylene housing
High switching current
Omni-directional
Prewired with 200mm of 2 core silicone cable
Warning
Mercury is a toxic substance. Do not cut open or incinerate these devices. Dispose of safely in accordance with prescribed practice and local regulations.
Mercury Tilt, Vibration & Movement
Glass and metal bodied versions offer bounce-free switching and quick break action even when tilted slowly. Contacts make and break with vibration motion and return to the open state at rest. Unless otherwise stated, the angle by which the switch must be tilted to ensure contact operation (operating angle), must be approximately 1.5 to 2 times the stated differential angle. The differential angle is the measure from the “just closed” position to the “just open” position. Inert gas and hermetic sealing protects contacts
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical Document
Specifications
Brand
AssemtechDifferential Angle
35°
Maximum Current
12.5A
Maximum AC Voltage
240V
Contact Resistance
5Ω
Terminal Type
Wire Lead
Length
226.5mm
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+105°C
Dimensions
226.5 x 30mm
Country of Origin
United Kingdom
Product details
Tip-Over Encapsulated
IP65 polypropylene housing
High switching current
Omni-directional
Prewired with 200mm of 2 core silicone cable
Warning
Mercury is a toxic substance. Do not cut open or incinerate these devices. Dispose of safely in accordance with prescribed practice and local regulations.
Mercury Tilt, Vibration & Movement
Glass and metal bodied versions offer bounce-free switching and quick break action even when tilted slowly. Contacts make and break with vibration motion and return to the open state at rest. Unless otherwise stated, the angle by which the switch must be tilted to ensure contact operation (operating angle), must be approximately 1.5 to 2 times the stated differential angle. The differential angle is the measure from the “just closed” position to the “just open” position. Inert gas and hermetic sealing protects contacts