Beha-Amprobe AMP 220 Clamp Meter, 600A dc, Max Current 600A ac CAT III 600V With UKAS Calibration

Technical Document
Specifications
Brand
Beha-AmprobeAbsolute Maximum AC Current Measurement
600A ac
Absolute Maximum DC Current Measurement
600A dc
Absolute Maximum AC Voltage Measurement
600V ac
Absolute Maximum DC Voltage Measurement
600V dc
Absolute Maximum Resistance Measurement
60kΩ
Model Number
AMP 220
Calibrated
UKAS
Best DC Current Accuracy
±2 % + 5LSD
Clamp Meter Type
AC/DC Clamp Meter
Best AC Current Accuracy
±2 % + 5LSD
Best AC Voltage Accuracy
±1 % + 5LSD
Best DC Voltage Accuracy
±1 % + 5LSD
Functions Measured
AC Current, AC Voltage, DC Current, DC Voltage, Resistance, Temperature
True RMS
Yes
Jaw Capacity Busbars
35mm
Power Source
Battery
Non-Contact Voltage Detector
Yes
Width
77mm
Length
224mm
Dimensions
224 x 77 x 37mm
Maximum Operating Temperature
+40°C
Battery Type
AAA
Safety Category
CAT III 600V
Best Resistance Measurement Accuracy
±1 % + 5LSD
Display Type
LCD
Minimum Operating Temperature
0°C
Safety Category Voltage
600V
Height
37mm
Maximum Conductor Size
35mm
Weight
254g
Safety Category Level
CAT III
Country of Origin
Taiwan, Province Of China
Product details
AMP-220-EUR TRMS Clamp Meter
The Beha-Amprobe AMP-220-EUR TRMS clamp meter is a new age device that measures the current up to 600A (AC/DC) and voltage up to 600VAC/DC. It features True-RMS sensing, low pass filters, and fast response processors for quick, error-free measurements. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, enabling accurate current measurement of both large and small diameter wires. It includes 2xAAA 1.5V batteries, a carrying hard case, test leads, and a users manual. This offers a complete range of innovative measuring functions for modern electrical environments.
Functions include:
Current, voltage, resistance
Capacitance and frequency
Continuity beeper
Low pass filter
Measurement of inrush current
Non-contact voltage detection
Key Features:
True RMS Accuracy - ensuring precise measurement of both sinusoidal and non-sinusoidal waveforms. This capability is crucial for accurate readings in modern, complex electrical environments.
Wide AC/DC Current Range - with an extensive current measurement range of up to 600 Amperes for both AC and DC, the AMP-220 offers versatility for a broad spectrum of applications from basic electrical troubleshooting to advanced industrial tasks.
Advanced Multimeter Functions - integrates a comprehensive multimeter, providing measurements for voltage, resistance, capacitance, and frequency.
Jaw Design for Accessibility - whether you are working with large cables or navigating through complex wiring systems, the ergonomic design ensures a secure and convenient grip.
Backlit Display with Dual Readout - clear visibility in various lighting conditions. Dual display functionality enables simultaneous viewing of current and voltage readings, facilitating real-time analysis without the need for constant toggling between modes.
Safety and Durability - built to comply with the latest industry standards. The rugged housing and durable construction ensure longevity, making it a reliable companion for professionals who demand robustness in their tools.
Current measurement: 600A max. AC/DC
Voltage measurement: 600V max. AC/DC
Jaw opening: 35mm max
Backlit LCD display
CAT III 600 V safety rated
60kohm resistance measurement with a continuity beeper
5.00 Hz to 999.9Hz frequency measurement
2500μF capacitance measurement
Diode test
An Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, enabling accurate current measurement of both large and small diameter wires
Automatic range selection
Minimum, maximum, average recording to capture variations automatically
Zero adjustments, relative value measurement
Auto power off
Data hold
Operating temperature ranges between 0°C to 40°C
Applications
Petrochemical
Oil and gas
Food and beverage
Pharmaceutical
Certifications
CE
cCSAus
UL listed
IEC/EN 61010-1
IEC/EN 61010-2-033
CAN/CSA C22.2 NO. 61010-1
IEC/EN 61010-2-032
IEC/EN 61010-031
EN 61326-1:2006
CAT III 600 V safety rated
Supplied with
Clamp Meter, 2 AAA 1.5V batteries, carrying hardcase, test leads, user manual
P.O.A.
Calibration type
UKAS Calibration
1
P.O.A.
Calibration type
UKAS Calibration
1
Stock information temporarily unavailable.
Please check again later.
Technical Document
Specifications
Brand
Beha-AmprobeAbsolute Maximum AC Current Measurement
600A ac
Absolute Maximum DC Current Measurement
600A dc
Absolute Maximum AC Voltage Measurement
600V ac
Absolute Maximum DC Voltage Measurement
600V dc
Absolute Maximum Resistance Measurement
60kΩ
Model Number
AMP 220
Calibrated
UKAS
Best DC Current Accuracy
±2 % + 5LSD
Clamp Meter Type
AC/DC Clamp Meter
Best AC Current Accuracy
±2 % + 5LSD
Best AC Voltage Accuracy
±1 % + 5LSD
Best DC Voltage Accuracy
±1 % + 5LSD
Functions Measured
AC Current, AC Voltage, DC Current, DC Voltage, Resistance, Temperature
True RMS
Yes
Jaw Capacity Busbars
35mm
Power Source
Battery
Non-Contact Voltage Detector
Yes
Width
77mm
Length
224mm
Dimensions
224 x 77 x 37mm
Maximum Operating Temperature
+40°C
Battery Type
AAA
Safety Category
CAT III 600V
Best Resistance Measurement Accuracy
±1 % + 5LSD
Display Type
LCD
Minimum Operating Temperature
0°C
Safety Category Voltage
600V
Height
37mm
Maximum Conductor Size
35mm
Weight
254g
Safety Category Level
CAT III
Country of Origin
Taiwan, Province Of China
Product details
AMP-220-EUR TRMS Clamp Meter
The Beha-Amprobe AMP-220-EUR TRMS clamp meter is a new age device that measures the current up to 600A (AC/DC) and voltage up to 600VAC/DC. It features True-RMS sensing, low pass filters, and fast response processors for quick, error-free measurements. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, enabling accurate current measurement of both large and small diameter wires. It includes 2xAAA 1.5V batteries, a carrying hard case, test leads, and a users manual. This offers a complete range of innovative measuring functions for modern electrical environments.
Functions include:
Current, voltage, resistance
Capacitance and frequency
Continuity beeper
Low pass filter
Measurement of inrush current
Non-contact voltage detection
Key Features:
True RMS Accuracy - ensuring precise measurement of both sinusoidal and non-sinusoidal waveforms. This capability is crucial for accurate readings in modern, complex electrical environments.
Wide AC/DC Current Range - with an extensive current measurement range of up to 600 Amperes for both AC and DC, the AMP-220 offers versatility for a broad spectrum of applications from basic electrical troubleshooting to advanced industrial tasks.
Advanced Multimeter Functions - integrates a comprehensive multimeter, providing measurements for voltage, resistance, capacitance, and frequency.
Jaw Design for Accessibility - whether you are working with large cables or navigating through complex wiring systems, the ergonomic design ensures a secure and convenient grip.
Backlit Display with Dual Readout - clear visibility in various lighting conditions. Dual display functionality enables simultaneous viewing of current and voltage readings, facilitating real-time analysis without the need for constant toggling between modes.
Safety and Durability - built to comply with the latest industry standards. The rugged housing and durable construction ensure longevity, making it a reliable companion for professionals who demand robustness in their tools.
Current measurement: 600A max. AC/DC
Voltage measurement: 600V max. AC/DC
Jaw opening: 35mm max
Backlit LCD display
CAT III 600 V safety rated
60kohm resistance measurement with a continuity beeper
5.00 Hz to 999.9Hz frequency measurement
2500μF capacitance measurement
Diode test
An Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, enabling accurate current measurement of both large and small diameter wires
Automatic range selection
Minimum, maximum, average recording to capture variations automatically
Zero adjustments, relative value measurement
Auto power off
Data hold
Operating temperature ranges between 0°C to 40°C
Applications
Petrochemical
Oil and gas
Food and beverage
Pharmaceutical
Certifications
CE
cCSAus
UL listed
IEC/EN 61010-1
IEC/EN 61010-2-033
CAN/CSA C22.2 NO. 61010-1
IEC/EN 61010-2-032
IEC/EN 61010-031
EN 61326-1:2006
CAT III 600 V safety rated
Supplied with
Clamp Meter, 2 AAA 1.5V batteries, carrying hardcase, test leads, user manual