Infineon Pioneer PSoC Development Board CY8CKIT-040
Technical Document
Specifications
Classification
Development Board
Kit Name
Pioneer
Technology
PSoC
Device Core
ARM Cortex M0
Processor Family Name
PsoC
Processor Part Number
CY8C4014LQI-422
Processor Type
MCU
Product details
CY8CKIT-040 PSoC 4000 Pioneer Kit, Cypress
The CY8CKIT-040 PSoC 4000 Pioneer Kit is an easy-to-use evaluation tool for ARM Cortex-M0 based Programmable System-on-Chip (PSoC) 4000 devices. PSoC Creator™ software runs on a PC so you can design your system, write application firmware, download code to the PSoC and step-through it using the built-in debugger.
• 16MHz CY8C4014LQI-422 Cortex-M0 core PSoC 4000 with 16KB Flash memory, 2KB SRAM
• On-board CY8C5868LTI-LP039 PSoC 5LP based programmer/debugger
• On-board FM24W256-G 32KB I²C FRAM memory
• On-board NCP1117DT +3.3V voltage regulator
• Reset pushbutton for PSoC 4
• Power supply LED
• User RGB LED
• KitProg status LED
• USB mini-B connector for programming/debugging of PSoC 4
• Pads for optional CR2032 coin-cell holder
• Arduino Uno v3 Shield headers
• 10-pin programming header for PSoC 5LP
• 12-pin extension header for PSoC 5LP GPIO
• Powered from USB (Vbus +5Vdc), Arduino Shield header (Vin +5 to +12Vdc) or coin-cell
Supplied with
CapSense Trackpad Shield with colour palette sticker, USB-A to Mini-B cable, 6 x Jumper wires, Quick start guide
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical Document
Specifications
Classification
Development Board
Kit Name
Pioneer
Technology
PSoC
Device Core
ARM Cortex M0
Processor Family Name
PsoC
Processor Part Number
CY8C4014LQI-422
Processor Type
MCU
Product details
CY8CKIT-040 PSoC 4000 Pioneer Kit, Cypress
The CY8CKIT-040 PSoC 4000 Pioneer Kit is an easy-to-use evaluation tool for ARM Cortex-M0 based Programmable System-on-Chip (PSoC) 4000 devices. PSoC Creator™ software runs on a PC so you can design your system, write application firmware, download code to the PSoC and step-through it using the built-in debugger.
• 16MHz CY8C4014LQI-422 Cortex-M0 core PSoC 4000 with 16KB Flash memory, 2KB SRAM
• On-board CY8C5868LTI-LP039 PSoC 5LP based programmer/debugger
• On-board FM24W256-G 32KB I²C FRAM memory
• On-board NCP1117DT +3.3V voltage regulator
• Reset pushbutton for PSoC 4
• Power supply LED
• User RGB LED
• KitProg status LED
• USB mini-B connector for programming/debugging of PSoC 4
• Pads for optional CR2032 coin-cell holder
• Arduino Uno v3 Shield headers
• 10-pin programming header for PSoC 5LP
• 12-pin extension header for PSoC 5LP GPIO
• Powered from USB (Vbus +5Vdc), Arduino Shield header (Vin +5 to +12Vdc) or coin-cell
Supplied with
CapSense Trackpad Shield with colour palette sticker, USB-A to Mini-B cable, 6 x Jumper wires, Quick start guide