H&D Wireless SPB105-AK-1 2.7 → 3.6V WLAN Module, 802.11b/g SDIO, SPI

RS Stock No.: 708-0062Brand: H&D WirelessManufacturers Part No.: SPB105-AK-1
View all in Wi-Fi Modules

Technical Document

Specifications

Brand

H&D Wireless

Supported Protocol

802.11b/g

Supported Security Standards

AES, WEP

Supported Bus Interfaces

SDIO, SPI

Supply Voltage

2.7 → 3.6V

Length

40mm

Maximum Operating Temperature

+70 °C

Minimum Operating Temperature

-20 °C

Width

24mm

Product details

10-pin RF header WiFi board

The SPB105 is a complete WLAN card for evaluation and development on platforms like the Atmel EVK1105 using the AVR32 CPU. The SPB105 enables developers to evaluate and develop their own wireless applications based on the 802.11b/g standard compliant HDG104 and the feature rich AVR32 platform from Atmel. The HDG104 enables a cost efficient ultra low power, high performance and feature rich WiFi client solution. It provides up to 54Mbit/s data rate when operating in the OFDM mode and up to 11Mbit/s data rate when operating in the DSSS/CCK mode.

Data Rates: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54Mbps
Modulation: QPSK, 16QAM, 64QAM DBPSK, DQPSK, CCK, OFDM with BPSK
WEP and AES hardware encryption accelerator up to 128 bit
On-chip RF filter for the ISM band 2.4GHz
An internal 32kHz oscillator maintains real time in power save mode
DMA hardware support for data flow to reduce CPU load.
Ultra Low Power (ULP) technology
On-board 160KB SRAM and 1KB EEPROM
Internal Boot-ROM
Advanced power management for optimum power consumption at varying load
External interfaces SPI and UART
Supply voltage: +2.75 to +3.6V

WLAN (Wireless Local Area Network) - H & D Wireless

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

P.O.A.

H&D Wireless SPB105-AK-1 2.7 → 3.6V WLAN Module, 802.11b/g SDIO, SPI

1

Available in multiples of 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

P.O.A.

H&D Wireless SPB105-AK-1 2.7 → 3.6V WLAN Module, 802.11b/g SDIO, SPI
Stock information temporarily unavailable.

1

Available in multiples of 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

Technical Document

Specifications

Brand

H&D Wireless

Supported Protocol

802.11b/g

Supported Security Standards

AES, WEP

Supported Bus Interfaces

SDIO, SPI

Supply Voltage

2.7 → 3.6V

Length

40mm

Maximum Operating Temperature

+70 °C

Minimum Operating Temperature

-20 °C

Width

24mm

Product details

10-pin RF header WiFi board

The SPB105 is a complete WLAN card for evaluation and development on platforms like the Atmel EVK1105 using the AVR32 CPU. The SPB105 enables developers to evaluate and develop their own wireless applications based on the 802.11b/g standard compliant HDG104 and the feature rich AVR32 platform from Atmel. The HDG104 enables a cost efficient ultra low power, high performance and feature rich WiFi client solution. It provides up to 54Mbit/s data rate when operating in the OFDM mode and up to 11Mbit/s data rate when operating in the DSSS/CCK mode.

Data Rates: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54Mbps
Modulation: QPSK, 16QAM, 64QAM DBPSK, DQPSK, CCK, OFDM with BPSK
WEP and AES hardware encryption accelerator up to 128 bit
On-chip RF filter for the ISM band 2.4GHz
An internal 32kHz oscillator maintains real time in power save mode
DMA hardware support for data flow to reduce CPU load.
Ultra Low Power (ULP) technology
On-board 160KB SRAM and 1KB EEPROM
Internal Boot-ROM
Advanced power management for optimum power consumption at varying load
External interfaces SPI and UART
Supply voltage: +2.75 to +3.6V

WLAN (Wireless Local Area Network) - H & D Wireless