ITT Cannon Male Crimp Circular Connector Contact, Wire Size 18 → 16 AWG
Technical Document
Specifications
Brand
ITT CannonGender
Male
Wire Size
18 → 16 AWG
Termination Method
Crimp
Series
T2P
For Use With
Trident & APD 6/7 Way Connectors
Current Rating
13A
Contact Type
Signal
Length
27.69mm
Contact Plating
Tin
Voltage Rating
30 V
Contact Material
Copper Alloy
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Product details
Signal Contacts
Two-part construction.Contacts may be crimped by a plier type or ratchet style tool.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
Stock information temporarily unavailable.
Please check again later.
P.O.A.
100
P.O.A.
100
Technical Document
Specifications
Brand
ITT CannonGender
Male
Wire Size
18 → 16 AWG
Termination Method
Crimp
Series
T2P
For Use With
Trident & APD 6/7 Way Connectors
Current Rating
13A
Contact Type
Signal
Length
27.69mm
Contact Plating
Tin
Voltage Rating
30 V
Contact Material
Copper Alloy
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Product details
Signal Contacts
Two-part construction.Contacts may be crimped by a plier type or ratchet style tool.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.