Molex, LFH Series Blank For Use With DMS-59 Plug Sub Assembly, LFH Plug Sub Assembly

RS Stock No.: 720-6220PBrand: MolexManufacturers Part No.: 5124-2022
brand-logo

Technical Document

Product details

Molex LFH Terminal Sticks, 70984 Series

These Molex Low Force Helix (LFH) Matrix 50 Terminal Sticks are sold separately and 4 are required per assembly. Use with 70929 Series Subassembly stock number 720-6612 .

Stock number 720-6220 has carrier.
Stock number 720-6227 is without carrier, trimmed to 3.3 mm.

Molex Low Force Helix (LFH) Range

The Molex Low Force Helix (LFH) contact system is designed for high-pin count, high speed signal requirements for both cable-to-board and board-to-board applications. The low insertion forces make the LFH system an ideal solution where multiple single lines need to be terminated or packaged into a limited space. The LFH Matrix 50 system contact layout is four rows on 1.27 by 1.27mm (.050 by .050") spacing and features I/O shielding and support both vertical and right angle board mounting. Termination is achieved by the wires being welded or soldered directly to the Terminals Sticks.

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

P.O.A.

Molex, LFH Series Blank For Use With DMS-59 Plug Sub Assembly, LFH Plug Sub Assembly

P.O.A.

Molex, LFH Series Blank For Use With DMS-59 Plug Sub Assembly, LFH Plug Sub Assembly
Stock information temporarily unavailable.

Technical Document

Product details

Molex LFH Terminal Sticks, 70984 Series

These Molex Low Force Helix (LFH) Matrix 50 Terminal Sticks are sold separately and 4 are required per assembly. Use with 70929 Series Subassembly stock number 720-6612 .

Stock number 720-6220 has carrier.
Stock number 720-6227 is without carrier, trimmed to 3.3 mm.

Molex Low Force Helix (LFH) Range

The Molex Low Force Helix (LFH) contact system is designed for high-pin count, high speed signal requirements for both cable-to-board and board-to-board applications. The low insertion forces make the LFH system an ideal solution where multiple single lines need to be terminated or packaged into a limited space. The LFH Matrix 50 system contact layout is four rows on 1.27 by 1.27mm (.050 by .050") spacing and features I/O shielding and support both vertical and right angle board mounting. Termination is achieved by the wires being welded or soldered directly to the Terminals Sticks.