Pfannenberg Enclosure Heater, 230V ac, 250W Output, 70°C, 183.5mm x 85mm x 104mm

RS Stock No.: 103-342Brand: PfannenbergManufacturers Part No.: FLH250 17025010007
brand-logo
View all in Enclosure Heaters

Technical Document

Specifications

Output Power

250W

Air Flow

50 m³/h, 61m³/h

Supply Voltage

230V ac

Surface Temperature

70°C

Depth

104mm

Height

183.5mm

Width

85mm

Country of Origin

Germany

Product details

Fan Heater - Pfannenberg FLH 250

Plug-in terminal connection
Suitable for both 50Hz and 60Hz
Duty cycle 100%
Heating element is resistance type with temperature monitor
Fitting position is airflow vertical, exit at top
Airflow 50m3/h (50Hz), 61m3/h (60Hz)
Constructed from aluminium extrusion, clear anodised
Binding post connection capacity: single filament 2 x 0.5 - 2.5mm2; fine multi-filament (soldered, wire and sleeve, pin terminal) 2 x 0.5 - 1.5mm2
Snap-in mounting for 35mm DIN-rail in accordance with EN 50022
Operating temperature -20°C to +70°C
Storage temperature -40°C to +70°C
Protection rating IP44

Approvals

UL

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

P.O.A.

Pfannenberg Enclosure Heater, 230V ac, 250W Output, 70°C, 183.5mm x 85mm x 104mm

P.O.A.

Pfannenberg Enclosure Heater, 230V ac, 250W Output, 70°C, 183.5mm x 85mm x 104mm
Stock information temporarily unavailable.

Technical Document

Specifications

Output Power

250W

Air Flow

50 m³/h, 61m³/h

Supply Voltage

230V ac

Surface Temperature

70°C

Depth

104mm

Height

183.5mm

Width

85mm

Country of Origin

Germany

Product details

Fan Heater - Pfannenberg FLH 250

Plug-in terminal connection
Suitable for both 50Hz and 60Hz
Duty cycle 100%
Heating element is resistance type with temperature monitor
Fitting position is airflow vertical, exit at top
Airflow 50m3/h (50Hz), 61m3/h (60Hz)
Constructed from aluminium extrusion, clear anodised
Binding post connection capacity: single filament 2 x 0.5 - 2.5mm2; fine multi-filament (soldered, wire and sleeve, pin terminal) 2 x 0.5 - 1.5mm2
Snap-in mounting for 35mm DIN-rail in accordance with EN 50022
Operating temperature -20°C to +70°C
Storage temperature -40°C to +70°C
Protection rating IP44

Approvals

UL