SICK UE401, 24V dc Safety Relay
Technical Document
Specifications
Brand
SickProduct Type
Safety Relay
Mount Type
Snap-On
Power Consumption
3.6W
Series
UE401
Terminal Type
Screw
IP Rating
IP67
Minimum Operating Temperature
-20°C
Standards/Approvals
ISO13849-1, EN60947-5-5, EN60947-5-1, ISO13850
Maximum Operating Temperature
55°C
Height
113.5mm
Length
66mm
Width
23mm
Hazardous Area Certification
ATEX, IECEx
Safety Category
PLe Category 4
Coil Voltage
24V dc
Country of Origin
United Kingdom
Product details
L4000, Type 4 Single/Multibeam System
The L4000 is a single/multi beam, non contact, safety system using a sender and a receiver arrangement and is certified according to IEC 61496 safety category Type 4.,The system consists of the UE401 controller to which, sender and receivers can be connected. Up to 4 sensor pairs can be connected to the UE401
Applications:
This device is intended for body detection of an operator under normal approach conditions toward a hazardous area
Features:
Easy installation
7 segment display
Integrated alignment aid
Reset and External Device Monitoring
2 OSSD (Output Signal Switching Device) outputs
Short response time 30ms
IP67 sender and receiver
Single Beam Safety Device
Stock information temporarily unavailable.
P.O.A.
1
P.O.A.
Stock information temporarily unavailable.
1
Technical Document
Specifications
Brand
SickProduct Type
Safety Relay
Mount Type
Snap-On
Power Consumption
3.6W
Series
UE401
Terminal Type
Screw
IP Rating
IP67
Minimum Operating Temperature
-20°C
Standards/Approvals
ISO13849-1, EN60947-5-5, EN60947-5-1, ISO13850
Maximum Operating Temperature
55°C
Height
113.5mm
Length
66mm
Width
23mm
Hazardous Area Certification
ATEX, IECEx
Safety Category
PLe Category 4
Coil Voltage
24V dc
Country of Origin
United Kingdom
Product details
L4000, Type 4 Single/Multibeam System
The L4000 is a single/multi beam, non contact, safety system using a sender and a receiver arrangement and is certified according to IEC 61496 safety category Type 4.,The system consists of the UE401 controller to which, sender and receivers can be connected. Up to 4 sensor pairs can be connected to the UE401
Applications:
This device is intended for body detection of an operator under normal approach conditions toward a hazardous area
Features:
Easy installation
7 segment display
Integrated alignment aid
Reset and External Device Monitoring
2 OSSD (Output Signal Switching Device) outputs
Short response time 30ms
IP67 sender and receiver
Single Beam Safety Device