SKF HK 3520 35mm I.D Needle Roller Bearing, 42mm O.D
Technical Document
Specifications
Brand
SKFInside Diameter
35mm
Outside Diameter
42mm
Roller Bearing Type
Needle
Race Width
20mm
Bore Type
Parallel
Material
Metal
Static Load Rating
46.5kN
Cage Material
Sheet Steel
Number of Rows
1
Roller Material
Steel
Dynamic Load Rating
22.9kN
End Type
Open
Reference Speed
7000rpm
Limiting Speed
8000rpm
Fatigue Limit Load
5.6kN
Maximum Speed - Grease
5600rpm
Maximum Speed - Oil
8000rpm
Country of Origin
Germany
Product details
SKF Drawn Cup Needle Roller Bearings Series HK
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity.
Generally used directly on the shaft, which is hardened and ground. Can also be combined with an inner ring for shaft that is not hardened
Used when the housing bore cannot be used as a raceway for a needle roller cage assembly, but where a very compact and economic bearing arrangement is required
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical Document
Specifications
Brand
SKFInside Diameter
35mm
Outside Diameter
42mm
Roller Bearing Type
Needle
Race Width
20mm
Bore Type
Parallel
Material
Metal
Static Load Rating
46.5kN
Cage Material
Sheet Steel
Number of Rows
1
Roller Material
Steel
Dynamic Load Rating
22.9kN
End Type
Open
Reference Speed
7000rpm
Limiting Speed
8000rpm
Fatigue Limit Load
5.6kN
Maximum Speed - Grease
5600rpm
Maximum Speed - Oil
8000rpm
Country of Origin
Germany
Product details
SKF Drawn Cup Needle Roller Bearings Series HK
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity.
Generally used directly on the shaft, which is hardened and ground. Can also be combined with an inner ring for shaft that is not hardened
Used when the housing bore cannot be used as a raceway for a needle roller cage assembly, but where a very compact and economic bearing arrangement is required