SKF NKI 10/16 10mm I.D Needle Roller Bearing, 22mm O.D
Technical Document
Specifications
Brand
SKFInside Diameter
10mm
Outside Diameter
22mm
Roller Bearing Type
Needle
Race Width
16mm
Bore Type
Parallel
Material
Metal
Static Load Rating
12.5kN
Cage Material
Reinforced Nylon 66
Number of Rows
1
Roller Material
Carbon Chromium Steel
Dynamic Load Rating
10.2kN
End Type
Open
Reference Speed
24000rpm
Limiting Speed
28000rpm
Fatigue Limit Load
1.53kN
Maximum Speed - Oil
26000rpm
Maximum Speed - Grease
17000rpm
Country of Origin
Germany
Product details
SKF Machine Needle Roller Bearings Series NKI
SKF Needle Roller Bearings have low sectional height and very high load carrying capacity for their size.
Needle roller with inner ring
Extremely suitable for bearing arrangements where radial space is limited
Needle Roller Bearings without flanges are separable, i.e. the outer ring, the needle roller and cage assembly and Inner Ring can all be mounted separately. In many applications, this considerably facilitates mounting
Used where it is not possible or economical to harden and grind the shaft
P.O.A.
1
P.O.A.
1
Stock information temporarily unavailable.
Please check again later.
Technical Document
Specifications
Brand
SKFInside Diameter
10mm
Outside Diameter
22mm
Roller Bearing Type
Needle
Race Width
16mm
Bore Type
Parallel
Material
Metal
Static Load Rating
12.5kN
Cage Material
Reinforced Nylon 66
Number of Rows
1
Roller Material
Carbon Chromium Steel
Dynamic Load Rating
10.2kN
End Type
Open
Reference Speed
24000rpm
Limiting Speed
28000rpm
Fatigue Limit Load
1.53kN
Maximum Speed - Oil
26000rpm
Maximum Speed - Grease
17000rpm
Country of Origin
Germany
Product details
SKF Machine Needle Roller Bearings Series NKI
SKF Needle Roller Bearings have low sectional height and very high load carrying capacity for their size.
Needle roller with inner ring
Extremely suitable for bearing arrangements where radial space is limited
Needle Roller Bearings without flanges are separable, i.e. the outer ring, the needle roller and cage assembly and Inner Ring can all be mounted separately. In many applications, this considerably facilitates mounting
Used where it is not possible or economical to harden and grind the shaft