Lapp 4 Core Power Cable, 2.5 mm², 50m, Black PVC Sheath, 25 A, 1 kV, 600 V, 15500113
Technical Document
Specifications
Brand
LappCross Sectional Area
2.5 mm²
Number of Cores
4
Sheath Colour
Black
Length
50m
Current Rating
25 A
CPR Certification
Eca
Outer Diameter
14mm
Sheath Material
PVC
Voltage Rating
1 kV, 600 V
Conductor Strand Type
Solid
Series
NYY-J
Core Strands
1.78 mm
Conductor Material
Bare Copper
Size of Strands
1.78 mm
Maximum Operating Temperature
+50°C
American Wire Gauge
13 AWG
Conductor Resistance
7.41 Ω/km
Insulation material
PVC
Fire Behaviour
Flame Retardant
Minimum Operating Temperature
+5°C
Standards Met
Euroclass Eca
Cable Shape
Round
Product details
Lapp Fixed Installation Power Cable - NYY-J
From Lapp, this NYY-J cable is a widely-used power and control cable that is often found in domestic and commercial electrical wiring. As well as being used in fixed installations, the cable is designed to be used for direct burial, and burial in concrete, providing the operating temperature is adhered to.
The cable is bare copper single core with PVC with a filling compounds over the core assembly. The PVC sheath is flame retardant and robust, allowing the cable to be used in dry, damp and wet interiors. NYY-J cable is also able very resistant to UV, and so is able to be used outdoors.
Features and Benefits
• Bare copper conductors
• PVC-based outer sheath
• Suitable for outdoor use
• Flame-retardant according IEC 60332-1-2
• Above, below, flush and recess routing
• Operating temperature during installation: -5°C to +50°C
• Operating temperature in a fixed installation: -40°C to +70°C
Applications
Able to be installed in open air and underground, NYY-J cable presents a versatile power cable that should be used in where the risk of mechanical damage is unlikely. As such it can be used in brickwork and concrete, proving the concrete is not shaken, vibrated or compressed. Lapp NYY-J able is often used in;
• Power stations
• Distributor boards
• Subscriber networks
Power Cable
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical Document
Specifications
Brand
LappCross Sectional Area
2.5 mm²
Number of Cores
4
Sheath Colour
Black
Length
50m
Current Rating
25 A
CPR Certification
Eca
Outer Diameter
14mm
Sheath Material
PVC
Voltage Rating
1 kV, 600 V
Conductor Strand Type
Solid
Series
NYY-J
Core Strands
1.78 mm
Conductor Material
Bare Copper
Size of Strands
1.78 mm
Maximum Operating Temperature
+50°C
American Wire Gauge
13 AWG
Conductor Resistance
7.41 Ω/km
Insulation material
PVC
Fire Behaviour
Flame Retardant
Minimum Operating Temperature
+5°C
Standards Met
Euroclass Eca
Cable Shape
Round
Product details
Lapp Fixed Installation Power Cable - NYY-J
From Lapp, this NYY-J cable is a widely-used power and control cable that is often found in domestic and commercial electrical wiring. As well as being used in fixed installations, the cable is designed to be used for direct burial, and burial in concrete, providing the operating temperature is adhered to.
The cable is bare copper single core with PVC with a filling compounds over the core assembly. The PVC sheath is flame retardant and robust, allowing the cable to be used in dry, damp and wet interiors. NYY-J cable is also able very resistant to UV, and so is able to be used outdoors.
Features and Benefits
• Bare copper conductors
• PVC-based outer sheath
• Suitable for outdoor use
• Flame-retardant according IEC 60332-1-2
• Above, below, flush and recess routing
• Operating temperature during installation: -5°C to +50°C
• Operating temperature in a fixed installation: -40°C to +70°C
Applications
Able to be installed in open air and underground, NYY-J cable presents a versatile power cable that should be used in where the risk of mechanical damage is unlikely. As such it can be used in brickwork and concrete, proving the concrete is not shaken, vibrated or compressed. Lapp NYY-J able is often used in;
• Power stations
• Distributor boards
• Subscriber networks
Power Cable