Aim-TTi TG 310 Function Generator, 0.03Hz Min, 3MHz Max
Technical Document
Specifications
Brand
Aim-TTiModel Number
TG 310
Digital Frequency
Yes
Minimum Frequency Range Sinewave
0.03Hz
Maximum Frequency Range Sinewave
3MHz
Minimum Frequency Range Square Pulse and Arbitrary Waveform
0.03 Hz
Maximum Frequency Range Square Pulse and Arbitrary Waveform
3MHz
Maximum Frequency Range Triangle/Saw
3MHz
Minimum Frequency Range Triangle/Saw
0.03Hz
Digital Amplitude and Offset
Yes
Attenuation
0 dB, -20 dB, -40 dB, -60 dB
Dimensions
235 x 260 x 88mm
Frequency Range Square Pulse and Arbitrary Waveform
0.03 Hz → 3 MHz
Minimum Operating Temperature
+5°C
Height
88mm
Input Impedance
10 kΩ
TTL Output Level
0 → 5V
Width
260mm
Length
235mm
Weight
1.9kg
Plug Type
Type C - European Plug, Type G - British 3-pin
CMOS Output Level
0 → 5V
Maximum Operating Temperature
+40°C
Output Amplitude
20V Pk-Pk
Output Impedance
50 Ω, 600 Ω
Country of Origin
United Kingdom
Product details
Aim-TTi TG210 Function Generator
Frequency Range: 0.002 Hz - 2 MHz
Frequency Input Voltage: ± 10V
Power Source: 110/ 120 Vac (Nominal); 220/ 240 Vac (Nominal by Rear and Panel adjustment)
CMOS Output Level: 0 to +5 V
In-Out Impedance: 10 k Ohm (Input); 50 & 600 Ohm (Output)
Rise/Fall Rate: < 100 ns
Sine wave Distortion: <0.5% (on 200, 2k & 20k ranges); <1% (on 2, 20 & 200k ranges); Harmonics >25dB down on 2M range
Sine wave Flatness: ± 0.2 dB to 200 kHz; ± 1 dB to 2 MHz
Square Wave Symmetry: 1:9 to 9:1
Triangle Wave Linearity: Better than 99% to 200 kHz
TTL Fan Out: Yes
TTL Output Level: 0 to +5V
Attenuator: 0dB; -20dB
1000:1 frequency change by vernier or external voltage
Variable DC offset with zero detent
Variable symmetry with constant frequency
Two switch-selectable ranges with 40dB vernier control within each range (No 600Ω output on TG230)
20V pk-pk output from 50Ω or 600Ω, plus TTL/CMOS output
Variable ±10V d.c. offset with zero detent
Switched -20dB attenuator and 40dB adjustment vernier
Sturdy ABS case with multi-position handle/stand
P.O.A.
1
P.O.A.
1
Stock information temporarily unavailable.
Please check again later.
Technical Document
Specifications
Brand
Aim-TTiModel Number
TG 310
Digital Frequency
Yes
Minimum Frequency Range Sinewave
0.03Hz
Maximum Frequency Range Sinewave
3MHz
Minimum Frequency Range Square Pulse and Arbitrary Waveform
0.03 Hz
Maximum Frequency Range Square Pulse and Arbitrary Waveform
3MHz
Maximum Frequency Range Triangle/Saw
3MHz
Minimum Frequency Range Triangle/Saw
0.03Hz
Digital Amplitude and Offset
Yes
Attenuation
0 dB, -20 dB, -40 dB, -60 dB
Dimensions
235 x 260 x 88mm
Frequency Range Square Pulse and Arbitrary Waveform
0.03 Hz → 3 MHz
Minimum Operating Temperature
+5°C
Height
88mm
Input Impedance
10 kΩ
TTL Output Level
0 → 5V
Width
260mm
Length
235mm
Weight
1.9kg
Plug Type
Type C - European Plug, Type G - British 3-pin
CMOS Output Level
0 → 5V
Maximum Operating Temperature
+40°C
Output Amplitude
20V Pk-Pk
Output Impedance
50 Ω, 600 Ω
Country of Origin
United Kingdom
Product details
Aim-TTi TG210 Function Generator
Frequency Range: 0.002 Hz - 2 MHz
Frequency Input Voltage: ± 10V
Power Source: 110/ 120 Vac (Nominal); 220/ 240 Vac (Nominal by Rear and Panel adjustment)
CMOS Output Level: 0 to +5 V
In-Out Impedance: 10 k Ohm (Input); 50 & 600 Ohm (Output)
Rise/Fall Rate: < 100 ns
Sine wave Distortion: <0.5% (on 200, 2k & 20k ranges); <1% (on 2, 20 & 200k ranges); Harmonics >25dB down on 2M range
Sine wave Flatness: ± 0.2 dB to 200 kHz; ± 1 dB to 2 MHz
Square Wave Symmetry: 1:9 to 9:1
Triangle Wave Linearity: Better than 99% to 200 kHz
TTL Fan Out: Yes
TTL Output Level: 0 to +5V
Attenuator: 0dB; -20dB
1000:1 frequency change by vernier or external voltage
Variable DC offset with zero detent
Variable symmetry with constant frequency
Two switch-selectable ranges with 40dB vernier control within each range (No 600Ω output on TG230)
20V pk-pk output from 50Ω or 600Ω, plus TTL/CMOS output
Variable ±10V d.c. offset with zero detent
Switched -20dB attenuator and 40dB adjustment vernier
Sturdy ABS case with multi-position handle/stand