Baumer GI333 Series Optical Incremental Encoder, 100 ppr, HTL/Push Pull Signal, Hollow Type, 12mm Shaft
Technical Document
Specifications
Brand
BaumerEncoder Technology
Optical
Series
GI333
Pulses Per Revolution
100
Maximum Revolutions
6000rpm
Output Signal Type
HTL/Push Pull
Shaft Type
Hollow
Shaft Diameter
12mm
Supply Voltage
4.75 → 30 V dc
IP Rating
IP54
Overall Width
58mm
Minimum Operating Temperature
-25°C
Maximum Operating Temperature
+85°C
Mounting Type
Through Hollow Shaft Flange
Switching Frequency
≤150 kHz
Connection Type
Flange connector M23
Country of Origin
Germany
Product details
Universal coders with hollow axis, Ø 58, type GI333
The coder can be powered by a wide supply range of between 4.75 and 30 Vdc.
Universal output stage, compatible with Totem pole, NPN or PNP and RS422 or TTL line transmitter.
Resolution up to 5000 pulses / turn.
A, B, Top zero and complemented output signals.
Hollow axis coders for direct mounting onto the end of a motor shaft, bored hole Ø 12 mm H7.
Concentric tightening using ring, rotation locking using rod and stopper supplied with the coder.
Anti-rotation spring available as a option.
Connection via supplied radial connector.
Shielded cable connected to the connector available as an option.
Application: robotics, metal or wood working, paper, textiles, packaging machinery, etc.
Kubler
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical Document
Specifications
Brand
BaumerEncoder Technology
Optical
Series
GI333
Pulses Per Revolution
100
Maximum Revolutions
6000rpm
Output Signal Type
HTL/Push Pull
Shaft Type
Hollow
Shaft Diameter
12mm
Supply Voltage
4.75 → 30 V dc
IP Rating
IP54
Overall Width
58mm
Minimum Operating Temperature
-25°C
Maximum Operating Temperature
+85°C
Mounting Type
Through Hollow Shaft Flange
Switching Frequency
≤150 kHz
Connection Type
Flange connector M23
Country of Origin
Germany
Product details
Universal coders with hollow axis, Ø 58, type GI333
The coder can be powered by a wide supply range of between 4.75 and 30 Vdc.
Universal output stage, compatible with Totem pole, NPN or PNP and RS422 or TTL line transmitter.
Resolution up to 5000 pulses / turn.
A, B, Top zero and complemented output signals.
Hollow axis coders for direct mounting onto the end of a motor shaft, bored hole Ø 12 mm H7.
Concentric tightening using ring, rotation locking using rod and stopper supplied with the coder.
Anti-rotation spring available as a option.
Connection via supplied radial connector.
Shielded cable connected to the connector available as an option.
Application: robotics, metal or wood working, paper, textiles, packaging machinery, etc.
Kubler